Thermal conductivity against densityHigher and further left: spreads more heat for its weightThermal expansion against thermal conductivityLower and further right: warps less when heated
3D printed (FDM). Ultimaker ABS, 3D-printed specimens, XY (flat); Ultimaker S5 Pro, engineering intent profile, 0.15 mm layer height, AA 0.4 print core, 100% infill, Cura 4.9, printed one-at-a-time, conditioned >=24 h at room temperature. TDS v5.00, April 20, 2022.
1
Ultimaker ABS Technical Data Sheet, v5.00UltiMakerarchived copyYield strength: typicalUltimate tensile strength: typical, peak stress (= stress at yield)Flexural strength: typicalElongation at break: typicalYoung's modulus (stiffness): typicalDensity: typicalGlass transition: typicalMax service temperature: HDT 0.455 MPa (printed specimens)
2
Engineering Polymers Part and Mold Design: Thermoplastics, A Design GuideCovestroarchived copyPoisson's ratio: base material: ABS family typical (Covestro Part and Mold Design guide, Table 3-1)
3
Terluran GP-22 (ABS) Product Data SheetINEOS StyrolutionThermal conductivity: base material: INEOS Styrolution Terluran GP-22 injection-molding ABS, typicalThermal expansion: base material: INEOS Styrolution Terluran GP-22 injection-molding ABS, range
Plastic ABS is 3D printed: its properties depend on build direction and print settings; these are typical values.
Plastic ABS has a thermal conductivity of 0.17 W/m·K (0.0982 BTU/hr·ft·°F). Basis: base material: INEOS Styrolution Terluran GP-22 injection-molding ABS, typical. Source: INEOS Styrolution, Terluran GP-22 (ABS) Product Data Sheet.
Coefficient of thermal expansion of Plastic ABS
Plastic ABS expands 80–110 µm/m·K (44.4–61.1 µin/in·°F): a 100 mm part grows 475 µm over a 50 °C rise. Basis: base material: INEOS Styrolution Terluran GP-22 injection-molding ABS, range. Source: INEOS Styrolution, Terluran GP-22 (ABS) Product Data Sheet.
Glass transition temperature of Plastic ABS
Plastic ABS softens at its glass transition, 101 °C (213 °F). Basis: typical. Source: UltiMaker, Ultimaker ABS Technical Data Sheet, v5.00archived copy.
Maximum service temperature of Plastic ABS
The maximum service temperature of Plastic ABS is 86.6 °C (188 °F). Basis: HDT 0.455 MPa (printed specimens). Source: UltiMaker, Ultimaker ABS Technical Data Sheet, v5.00archived copy.